Roller Shutter Installation & Repairs in Melbourne
Residential, Commercial & Industrial Roller Shutters Melbourne
Roller shutters Melbourne wide, from Werribee out to Croydon, measured on site by Kingsley Roller Shutters and priced in writing.
✔ Written price for each opening, start to finish.
✔ Measure on site is free, and no call out fee.
✔ Employed crew turns up, never a subcontractor.
✔ Foam filled slats dull tram and traffic noise.
✔ Repairs and servicing on any brand of shutter.
Roller shutters Melbourne wide, north to Craigieburn, east to Ringwood, south to Mentone, west to Tarneit.
Our Roller Shutters Services
What people say about Kingsley Roller Shutters
“We had electric roller shutters put on the western windows of our Morphett Vale place and the difference in the afternoon is hard to believe. The Kingsley Roller Shutters team measured up, gave us a fixed price, and the crew had the lot fitted in a day without any mess left behind. The back bedroom finally stays cool enough to sleep in. Best money we have spent on the house.”
★★★★★
- Karen W., Morphett Vale
“Our roller shutter jammed halfway with the slats sitting crooked in the guide and I assumed it was a write off. Kingsley came out to Golden Grove two days later, straightened the guides, replaced three slats and swapped the motor that had burnt out. Priced fairly and no push to sell me a whole new shutter. That is why they get the next job.”
★★★★★
- Dave M., Golden Grove
“We run a bottle shop in Port Adelaide and needed the front locked down properly after a break in attempt. Kingsley Roller Shutters quoted commercial roller shutters with a perforated curtain so the window display still shows at night, then fitted them on a Sunday so we never shut the doors. Tidy work and the staff feel a lot safer.”
★★★★★
- Nick A., Port Adelaide
10 reasons Melbourne households keep booking us:
Roller shutters Melbourne wide, quoted for free.
A written price per opening, nothing tacked on.
25 years in the trade, on homes and buildings.
Licensed, insured, and our own crew on the tools.
A licensed electrician wires every motorised job.
Winder, electric switch, remote or app control.
Australian made aluminium slats & solid motors.
Foam filled or perforated slats, whichever suits.
Square or round headbox, matched to the reveal.
Roller shutters Melbourne wide, bayside to hills.
Contact Our Friendly & Experienced Team
Get A Free Consultation & Quote For New Roller Shutters Installs
✓ Quality materials & workmanship ✓ Experienced & insured ✓ Servicing Melbourne
✓ Quality materials & workmanship
✓ Experienced & insured
✓ Servicing Melbourne
Melbourne’s Preferred Roller Shutter Installation Team
Kingsley has 25 years in the trade behind every roller shutters Melbourne booking, and the run takes in the western growth suburbs at Tarneit and Point Cook, the tram lined streets of Northcote and Richmond, bayside glass at Brighton and Mentone, and the outer east through Ringwood and Croydon. Book with Kingsley Roller Shutters for a free on site measure with no call out fee.
Nothing gets ordered off a guess. Every opening is measured in person and written up per opening, then built in Australian made aluminium, foam filled or perforated, square or round headbox, run by winder, wall switch, remote or app. Build time is usually two to four weeks.
The one crew fits shutters on houses, shopfront and office curtains and heavy duty industrial shutters for warehouses and docks. No part of it is handed off.
Shutter stuck halfway, sitting crooked, or ignoring the remote? Our repair and service work covers any brand, with spare slats, straps and motors on the van. A licensed electrician handles anything motorised.
COMMON QUESTIONS FROM MELBOURNE HOMES AND BUSINESSES
Frequently Asked Questions
How far across Melbourne does the crew go?
Our own crew works the metro end to end, west through Werribee, Tarneit and Point Cook, north up to Craigieburn and Epping, east out past Ringwood to Croydon and Ferntree Gully, and down the bay side through Cheltenham. A job in Footscray books the same way as one an hour away, and the measure carries no call out fee. Give us the suburb and street and we will lock in a visit.
Is the on site measure and quote free?
It is. We come to the house, measure every opening, run through slat type, headbox shape and how you want each shutter driven, then leave you with a written price per opening. No call out fee, and no charge if you decide not to go ahead. A Coburg quote on four street facing windows takes about half an hour, and the number we write down is the number you pay.
How long until the shutters turn up?
Build time is normally two to four weeks from the day you sign off the quote, since each shutter is made in Australian made aluminium to the sizes we measured rather than pulled from stock. Fitting gets booked once they arrive. A Reservoir weatherboard with six openings is usually finished inside one day, and you get a call before the van leaves the yard.
Can I pick how the shutters are driven?
You can. A manual winder or strap still suits a window that only gets shut in a heatwave, while an electric shutter on a wall switch, a remote or app control earns its keep on daily openings and anything above head height. A Preston brick home often gets winders on the side windows and motors across the front. All motorised work is wired by a licensed electrician on our team.
What slat and headbox choices do I get?
Bedrooms and any glass copping the late sun usually get foam filled slats, where the core inside each slat blunts both heat and traffic hum. Where you want a bit of light and airflow but still want the opening shut, perforated slats do that job well on a shaded verandah. Headboxes are square or round, chosen to sit right in the reveal you have. On an Ascot Vale terrace a round box tucks in under a narrow eave.
Will you repair a shutter you did not fit?
Yes, any brand, any age. Nine times in ten the fault is a slat that has split or bowed, a guide shoved off line, a strap or winder worn out, or a cooked tubular motor. Since the usual slats, straps and motors travel on the van, a lot of Box Hill repairs are done on the first visit. If a curtain is past saving we will tell you before you spend money on it.
Can a shopfront be covered without closing?
It can. Commercial roller shutters go over shopfronts, offices and hospitality frontages, solid curtains for a full lock down or perforated curtains where the window display should still read after hours. Control is keyed or motorised. A Prahran shop gets measured during a quiet stretch of trade and fitted after hours, so staff walk in next morning to finished work.
Are the industrial shutters built for hard use?
They are. Industrial roller shutters on warehouses, workshops and loading docks can cycle dozens of times a day, so the curtain, guides and motor are all specified heavier than anything on a house. That means three phase or heavy duty single phase motors, reinforced guides, and safety edges where forklifts and people share the opening. A Laverton North dock can go on yearly servicing.
Do you take care of garage doors too?
Yes. The same crew covers garage door installation, replacement, repairs, automation, motor replacement and remote replacement across the metro, so one visit can sort the shutters and the garage together. A Glen Waverley house getting bedroom shutters often has the opener checked while the van is there. The longer version sits on our garage door services page.
Do shutters help through a Melbourne heatwave?
A foam filled curtain sits outside the glass, so a hot northerly is stopped before it reaches the window rather than after. That takes load off the cooling on a run of 38 degree days, and the same curtain holds warmth in through a cold snap. In Sunshine West, where late sun hammers the back rooms, shutters on that side buy the most comfort for the least outlay.
Do you service shutters after installation?
Yes, and a yearly check on the curtain, guides, straps and motor is worth booking. It is the cheapest way to catch a fraying strap or a straining motor before a shutter stops halfway. Blackburn customers on yearly servicing usually get years more out of a motor than the ones who ring only when something dies. Homes, shops and industrial sites all book the same way.
Are you licensed and insured for this work?
We are licensed and insured, and the crew on your job is employed by us instead of subcontracted, so whoever measured the opening is whoever fits the shutter. Motorised and three phase work goes through a licensed electrician on the team. An Essendon owner deals with the same faces at the measure, on install day and on any service call down the track.
Can you fit shutters to older inner suburb homes?
Yes. Older weatherboard and double brick makes up a good share of the run, and the crew is in Northcote and Collingwood most weeks. Century old reveals are rarely square, which is exactly why we measure in person and build to those numbers rather than trimming a stock shutter at the kerb. Access, eave depth and headbox shape all get checked on the quote visit.
How do I get roller shutters Melbourne priced?
Send through your suburb and a rough count of the openings and we will book a free on site measure with no call out fee. You finish up with a written price for each opening, the slat and control options laid out plainly, and a straight read on what to do first. A Doncaster quote might cover two bedrooms now and the rest of the house next winter.
Contact Our Friendly & Experienced Team
Get A Free Consultation & Quote For New Roller Shutters Installs
✓ Quality materials & workmanship ✓ Experienced & insured ✓ Servicing Melbourne
✓ Quality materials & workmanship
✓ Experienced & insured
✓ Servicing Melbourne
Garage Door Services In Melbourne
Garage Door Installation
Roller, tilt and sectional doors are measured in the opening, then hung level, balanced and cycled through a full test the same day. Springs, tracks and the opener sit inside the written price.
Garage Door Replacement
Rusted bottom rails, dented panels and doors that cannot be fixed again come down, and the new door goes up that visit where the opening allows. Colour and profile picked to match the house.
Garage Door Repairs
Snapped cables, broken torsion springs, rollers off the track, doors stalling half open. The van carries the parts that fail most, so plenty of Melbourne jobs finish on the first call out.
Garage Door Automation
Automation added to a door you still wind by hand, opener sized on the weight and how many trips it makes daily. A remote pair, safety beams and a manual release for power cuts are all part of it.
Garage Door Motor Replacement
An opener that grinds, skips teeth or trips the breaker is past repair. A quality motor goes in, travel and force limits set to your door, and the dead unit leaves in the van with us.
Roller Shutter Services In Melbourne
Residential Roller Shutters
Aluminium shutters, foam filled, covering windows and sliding doors so heat, light and street noise stay outside. Winder, electric or remote control, decided room by room.
Roller Shutter Repairs
Shutters sitting crooked, shutters jammed solid, shutters ignoring the remote. Guides pushed off line, cracked slats, stretched straps and burnt out motors all get put right.
Commercial Roller Shutters
Shopfronts and offices locked down the moment trade ends. Curtains solid or perforated, keyed or motorised, with servicing so they keep cycling through a busy week.
Industrial Roller Shutters
Warehouses, workshops and loading docks cycling shutters all day get heavier gear. Big single phase or three phase motors, safety edges fitted, plus repairs after a forklift clips a guide.
What A Roller Shutter Specialist Brings
Bad measuring shows up in the first week of use. You get daylight down the guides, a curtain that scrapes one side, and a motor pulling more weight than it was picked for, straining a bit more each cycle until it dies.
Our crew takes the sizes at the opening, orders to those exact numbers, and dials in the motor limits before packing up the van. Set up like that, a foam filled curtain over late sun glass takes serious sting out of a 38 degree northerly.
You also finish with one number to ring afterwards. We look after what we install and take on work other firms left behind, with spare slats, straps and motors riding along for the fast jobs.
Roller Shutters Melbourne Wide, Suburb By Suburb
Our crew works the whole metro, west through Werribee, Tarneit and Point Cook, north to Craigieburn, Epping and Mernda, east out through Box Hill, Ringwood and Croydon, and down the bay side past Brighton, Cheltenham and Mentone.
- Albert Park
- Albion
- Alphington
- Altona
- Altona North
- Ardeer
- Armadale
- Ascot Vale
- Ashburton
- Ashwood
- Balwyn
- Balwyn North
- Bayswater
- Beaumaris
- Bentleigh
- Berwick
- Black Rock
- Blackburn
- Blackburn North
- Bonnie Brook
- Box Hill
- Box Hill South
- Braeside
- Brighton
- Broadmeadows
- Brookfield
- Brooklyn
- Bulleen
- Burnside
- Burwood
- Camberwell
- Campbellfield
- Carnegie
- Caroline Springs
- Caulfield
- Cheltenham
- Clayton
- Coburg
- Collingwood
- Craigieburn
- Croydon
- Dallas
- Deer Park
- Derrimut
- Diggers Rest
- Dingley Village
- Doncaster
- Donvale
- Doreen
- Elsternwick
- Eltham
- Endeavour Hills
- Epping
- Essendon
- Exford
- Eynesbury
- Ferntree Gully
- Footscray
- Forest Hill
- Fraser Rise
- Glen Iris
- Glen Waverley
- Green Gully
- Greensborough
- Hallam
- Hampton
- Harkness
- Hawthorn
- Heidelberg
- Highett
- Hillside
- Hopetoun Park
- Hoppers Crossing
- Ivanhoe
- Kealba
- Keilor
- Keilor Downs
- Kew
- Keysborough
- Kilsyth
- Kings Park
- Knoxfield
- Kurunjang
- Lalor
- Laverton
- Laverton North
- Malvern
- Meadow Heights
- Melton South
- Melton West
- Mentone
- Mernda
- Mill Park
- Mitcham
- Mont Albert
- Moorabbin
- Mount Cottrell
- Mount Waverley
- Narre Warren
- Noble Park
- Northcote
- Nunawading
- Oakleigh
- Pakenham
- Parwan
- Pascoe Vale
- Plumpton
- Point Cook
- Prahran
- Preston
- Ravenhall
- Reservoir
- Richmond
- Ringwood
- Rockbank
- Rowville
- Scoresby
- South Melbourne
- South Morang
- Springvale
- St Albans
- St Kilda
- Sunbury
- Sunshine West
- Sydenham
- Tarneit
- Taylors Hill
- Templestowe
- Toolern Vale
- Tottenham
- Truganina
- Tullamarine
- Werribee
If your suburb sits on that list, the van already passes it most weeks. Distance changes nothing on the price. The measure costs nothing, no call out fee applies, and each opening gets its number in writing before an order goes in. Once you approve it, Australian made shutters take two to four weeks to build, and our own crew fits them with a licensed electrician on hand for motorised roller shutters Melbourne wide.
Talk To The Crew Who Does The Work
Get A Free Consultation & Quote For New Roller Shutters Installs
✓ Quality materials & workmanship
✓ Experienced & insured
✓ Servicing Melbourne